maxi cure glue
maxi cure glue
 |
Maxi-Cure Extra Thick Glue, 1 oz. List Price: $5.49 Sale Price: $4.25  |
|
Maxi-Cure 1oz Extra Thick |
 |
Bob Smith 113 Maxi-Cure 2oz Extra Thick List Price: $9.99 Sale Price: $7.99 |
|
Maxi-Cure 2oz Extra Thick |
 |
Bob Smith 114 Maxi-Cure 8oz Extra Thick List Price: $29.99 Sale Price: $23.98 |
|
Maxi-Cure 8oz Extra Thick |
 |
Install Bay Instant Extra Thick Glue 1 Ounce- MAXI-CURE1 List Price: $17.19 Sale Price: $9.05 |
|
Instant Extra Thick Glue 1 Ounce- MAXI-CURE1 |
 |
Install Bay Instant Extra Thick Glue 2 Ounce- MAXI-CURE2 List Price: $31.39 Sale Price: $13.57 |
|
Instant Extra Thick Glue 2 Ounce- MAXI-CURE2 |
 |
Install Bay Instant Extra Thick Glue .75 Ounce- MAXI-CURE34 List Price: $14.09 Sale Price: $6.10 |
|
Instant Extra Thick Glue .75 Ounce- MAXI-CURE34 |
 |
Maxi-Cure Extra Thick .75oz Pocket CA Adhesive Glue List Price: $4.49 Sale Price: $3.99 |
|
BSI135 Maxi-Cure Extra Thick .75oz Pocket CA Adhesive Glue by Bob Smith IndMaxi-Cure Extra Thick .75oz Pocket CA Adhesive Glue by Bob Smith Ind MAXI-CURE extra thick CA is the best CA for most plastics, including GEs Lexan MAXI-CURE is the best choice for plastic model assembly... |
|
|
BSI MAXI-CURE Extra Thick Glue 1/2oz Adhesive BSI-111 10-25 sec. Made in USA $4.99 A SUPERSTITION HOBBIES PRODUCTMAXI-CURE+Gap Filling Glue for Plastics & Hardwoods1/2ozPart #: SH.BSI-112Bob Smith IndustriesMAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.Directions: Remove cap and cut off top 1/32" while holding bottle upright. Apply to one surface, then hold parts tightly together for 10 seconds. Bonds most plastics, including Lexan TM of General Electric Corp. Visit My eBay Stor Size: 1/2oz Type: Glue Manufacturer Recommended Age: NEW Color: Pink Gender: Unisex Age: 14+ |
|
|
BSI SUPER-GOLD+ Insta-Cure ODORLESS Gap Filling Glue Foam Safe 1oz 10-25sec. $15.99 A SUPERSTITION HOBBIES PRODUCT SUPER-GOLD+ Insta-Cure ODORLESS Gap Filling Glue 10-25 Second Bond Time 2oz Part #: SH.BSI-127 Bob Smith Industries SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for bette Size: 1oz Type: Glue Manufacturer Recommended Age: New Color: Gold Gender: Unisex Age: 14+ |
|
|
BSI SUPER-GOLD+ Insta-Cure ODORLESS Gap Filling Glue Foam Safe 1/2oz 10-25sec. $9.99 A SUPERSTITION HOBBIES PRODUCTSUPER-GOLD+Insta-Cure ODORLESS Gap Filling Glue10-25 Second Bond Time1/2ozPart #: SH.BSI-126Bob Smith IndustriesSUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock Size: 1/2oz Type: GLUE Manufacturer Recommended Age: NEW Color: Gold Gender: Unisex Age: Teen |
|
|
BSI SUPER-GOLD Insta-Cure ODORLESS thin glue 100% Foam Safe 1/2oz Cyanoacrylate $12.99 A SUPERSTITION HOBBIES PRODUCTSUPER-GOLDInsta-Cure ODORLESS thin Glue1/2ozPart #: SH.BSI-121Bob Smith IndustriesSUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large a Size: 1/2oz Type: GLUE Manufacturer Recommended Age: NEW Color: Gold Gender: Unisex Age: 14+ |
|
|
Maxi $8.49 Maxi |
|
|
The Cure $6.49 The Cure |
|
|
BSI INSTA-CURE+ Gap Filling Glue 3/4oz Adhesive BSI-133 Made in USA $5.99 A SUPERSTITION HOBBIES PRODUCTINSTA-CURE+Gap Filling Glue3/4ozPart #: SH.BSI-133INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.Directions: Remove Cap and cut off top 1/32" while holding bottle upright. Apply to one surface, then hold parts tightly together for 10 seconds. Full strength is reached in 2 hours. Replace cap after use for best shelf life. Visit My eBay Store: Superstition HobbiesFor additional Products.Please email with any questions prior to bidding. We will try to get to them as fast as possible, but Size: 3/4oz Type: Glue Manufacturer Recommended Age: NEW Color: Purple Gender: Unisex Age: 14+ |
|
|
BSI INSTA-CURE+ Gap Filling Glue 1/2oz Adhesive 5-15 sec Cyanoacrylate USA $5.99 A SUPERSTITION HOBBIES PRODUCTINSTA-CURE+Gap Filling Glue1/2ozPart #: SH.BSI-106INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.Directions: Remove Cap and cut off top 1/32" while holding bottle upright. Apply to one surface, then hold parts tightly together for 10 seconds. Full strength is reached in 2 hours. Replace cap after use for best shelf life. Visit My eBay Store: Superstition HobbiesFor additional Products.Please email with any questions prior to bidding. We will try to get to them as fast as possible, but Size: 1/2oz Type: Glue Manufacturer Recommended Age: New Color: Purple Gender: Unisex Age: 14+ |
|
|
BSI INSTA-CURE 2oz Bottle Super Thin Glue Adhesive Cyanoacrylate BSI-103 USA $11.99 A SUPERSTITION HOBBIES PRODUCT INSTA-CURE Super Thin Glue 2oz Bottle Part #: SH.BSI-103 Bob Smith Industries INSTA-CUREâ„¢ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond Directions: Loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off 1/32" from top while holding bottle upright. Hold parts tightly together and apply around seam for instant bonding. Full strength is reached in 1 hour. Visit My eBay Store: Superstition Hobbies For additional Products. Please email with any questions prior to bidding. We will try to get to them as fast as possible, but please allow 24 hrs just in case. I Size: 2oz Type: Glue Manufacturer Recommended Age: New Color: Blue Gender: Unisex Age: 14+ |
|
|
Superstition Hobbies INSTA-CURE+ Gap Filling Glue 1oz Adhesive BSI-107 USA $5.99 A SUPERSTITION HOBBIES PRODUCTINSTA-CURE+Gap Filling Glue1ozPart #: SH.BSI-107INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.Directions: Remove Cap and cut off top 1/32" while holding bottle upright. Apply to one surface, then hold parts tightly together for 10 seconds. Full strength is reached in 2 hours. Replace cap after use for best shelf life. Visit My eBay Store: Superstition HobbiesFor additional Products.Superstition Hobbies is a Authorized Direct Imported/Distributor of Genuine SYMA Helicopters And Parts D Size: 1oz Type: Adhesives Manufacturer Recommended Age: NEW Color: Purple Gender: Unisex Age: 14+ |
|
|
BSI INSTA-CURE 1/2oz Bottle Super Thin Glue Adhesive Cyanoacrylate 1-3 sec. USA $4.99 A SUPERSTITION HOBBIES PRODUCTINSTA-CURESuper Thin Glue1/2oz BottlePart #: SH.BSI-101 Bob Smith IndustriesINSTA-CUREâ„¢ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bondDirections: Loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off 1/32" from top while holding bottle upright. Hold parts tightly together and apply around seam for instant bonding. Full strength is reached in 1 hour. Visit My eBay Store: Superstition HobbiesFor additional Products.Please email with any questions prior to bidding. We will try to get to them as fast as possible, but please allow 24 hrs just in case.International Sh Size: 1/2oz Type: Glue Manufacturer Recommended Age: NEW Color: Blue Gender: Unisex Age: 14+ |
|
|
BSI INSTA-CURE Super Thin Glue 1oz 1-3 sec. CA Adhesive BSI-102 Shipping USA $6.99 A SUPERSTITION HOBBIES PRODUCTINSTA-CURESuper Thin Glue1oz BottlePart #: SH.BSI-102 Bob Smith IndustriesINSTA-CUREâ„¢ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bondDirections: Loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off 1/32" from top while holding bottle upright. Hold parts tightly together and apply around seam for instant bonding. Full strength is reached in 1 hour. Visit My eBay Store: Superstition HobbiesFor additional Products.Please email with any questions prior to bidding. We will try to get to them as fast as possible, but please allow 24 hrs just in case.International Ship Size: 1oz Type: Glue Manufacturer Recommended Age: NEW Color: Blue Gender: Unisex Age: 14+ |
|
|
BSI SLOW-CURE 30 minute EPOXY 4.5oz Hobby Modeling Adhesives Glue SH.BSI-205 USA $10.99 A SUPERSTITION HOBBIES PRODUCT SLOW-CURE EPOXY 30 Minute 4.5oz Part #: SH.BSI-205 Bob Smith Industries SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours. It has the highest strength of our epoxies. Visit My eBay Store: Superstition Hobbies For additional Products. Please email with any questions prior to bidding. We will try to get to them as fast as possible, but please allow 24 hrs just in case. International Shipping: I use International Post and I will only state the actual sale amount on the cn22 please do not ask to alter from these. If y Size: 4.5oz Type: Glue Manufacturer Recommended Age: New Color: Yellow Gender: Unisex Age: 14+ |
|
|
BSI SLOW-CURE 30 minute EPOXY 9oz Hobby Modeling Adhesives Glue SH.BSI-206 USA $15.99 A SUPERSTITION HOBBIES PRODUCT SLOW-CURE EPOXY 30 Minute 9oz Part #: SH.BSI-206 Bob Smith Industries SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours. It has the highest strength of our epoxies. Visit My eBay Store: Superstition Hobbies For additional Products. Please email with any questions prior to bidding. We will try to get to them as fast as possible, but please allow 24 hrs just in case. International Shipping: I use International Post and I will only state the actual sale amount on the cn22 please do not ask to alter from these. If you Size: 9oz Type: Glue Manufacturer Recommended Age: New Color: Yellow Gender: Unisex Age: 14+ |
|
|
BSI FINISH-CURE 20 minute EPOXY 4.5oz Hobby Modeling Adhesives Glue USA $12.99 A SUPERSTITION HOBBIES PRODUCT FINISH-CURE EPOXY 20 Minute 4.5oz Part #: SH.BSI-209 Bob Smith Industries FINISH-CUREâ„¢ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CUREâ„¢ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CUREâ„¢ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CUREâ„¢. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping o Size: 4.5oz Type: Glue Manufacturer Recommended Age: New Color: Grey Color Mapping: Grey/Black/White Gender: Unisex Age: 14+ |
|
|
Metra TheInstallBay Fishman INSTGL8 8Oz. InstaCure Plus Instant Cure Glue Cyanoacrylate Adhesive $52.57 InstaCure+ is a higher viscosity cyanoacrylate (CA) for loose fitting joints in which the adhesive must bridge gaps. Normally the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas including those with close fitting joints such as laminations InstaCure+ should also be used. To prevent premature curing don't spread the glue into a thin film. Lay down a serpentine bead with about 1 separations on one surface then assemble the parts letting the pressure spread the CA out. GapFilling 515 Second Glue Cyanoacrylate. Size: 8 oz. Cyanoacrylates is the adhesive of choice for most hobby and household applications. Chemically link (polymerize) when pressed into a thin film. Capable of forming bonds that in many cases are stronger than the material that is being adhered. Authorized Internet Dealer. |
|
|
No Cure $1.49 No Cure Vinyl Sticker Express yourself with a sticker. This black sticker features white text. Size is approximate. |
|
|
Glue $9.29 Glue is the story of four boys growing up in the Edinburgh schemes, and about the loyalties, the experiences, and the secrets that hold them together into their 30s.... |
|
|
Superstition Hobbies UN-CURE CA Remover 1oz Glue Remover Debonder BSI-161 USA $5.99 A SUPERSTITION HOBBIES PRODUCTUN-CURECA Remover1ozPart #: SH.BSI-161UN-CUREâ„¢ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CUREâ„¢ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water.Directions: Remove cap and cut off 1/32" from top. Will dissolve cured Cyanoacrylate within a few minutes. Also removes paint and most adhesive residue. To seperate bonded skin apply UN-CURE, then roll, do not pull skin apart. Wash skin with soap and water. Visit My eBay Store: Superstition HobbiesFor additional Products.Superstition Hobbies is a Authorized Direct Imported/Distributor of Genuine SYMA Helicopters And Parts Directly from SYMA Toys Industrial Co. LTD.Please email with any questions prior to bidding. We will try to get to them as fast as possible, but please allow 24 hrs just in case. International Shipping: I use International Post a Size: 1oz Type: Debonder Cyanoacrylate Remover Adhesive Remover Manufacturer Recommended Age: NEW Color: Green Gender: Unisex Age: 14+ |
|
|
Super Glue Corp. GR-12 Glass Repair- Pack of 12 $38.05 From our humble roots producing hobby airplane kits Super Glue Corporation/Pacer Technology has grown exponentially over the last four decades to become the worldwide leader in the manufacture of high grade bonding agents. Our most famous line the Super Glue adhesive is our signature product recognized around the world as a standard of quality strength and performance. Super Glue Corporation is far more than merely the Super Glue product line however. We also produce a variety of other bonding materials including high performance engineering adhesives. Super Glue is renowned the world over for the strength of its bonds its versatility of use and easy application. Whether a hole needs a seal or a crack needs repairing Super Glue is the first thing that craftspersons hobbyists and contractors use for all their construction or repair needs.Glass Repair UV Cure Glass Adhesive .06 fl. oz. |
|
|
Super Glue Corp. GR12 Glass Repair Pack of 12 $47.11 From our humble roots producing hobby airplane kits Super Glue Corporation/Pacer Technology has grown exponentially over the last four decades to become the worldwide leader in the manufacture of high grade bonding agents. Our most famous line the Super Glue adhesive is our signature product recognized around the world as a standard of quality strength and performance. Super Glue Corporation is far more than merely the Super Glue product line however. We also produce a variety of other bonding materials including high performance engineering adhesives. Super Glue is renowned the world over for the strength of its bonds its versatility of use and easy application. Whether a hole needs a seal or a crack needs repairing Super Glue is the first thing that craftspersons hobbyists and contractors use for all their construction or repair needs.Glass Repair UV Cure Glass Adhesive .06 fl. oz. |
|
|
Glue Works $13.49 Glue Works |
|
|
Glue,Multi,2tip,Clr $2.99 GLUE,MULTI,2TIP,CLR |
|
|
Cure $16.49 Ecm Records:849650 |
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
