self adhesive laser film

self adhesive laser film

The Art Of Making Rubber Stamps

The traditional red rubber stamp that everybody is familiar with will have been manufactured in a vulcanizing press. The first rubber stamp vulcanizing press was patented in 1890 by Charles Schultze in New Orleans USA. Vulcanizing  is today one of the most cost effective methods of making rubber stamps for mass produced stamps. Each batch of stamps is produced using a mould. This method of manufacture is more suited to stamp making where the same moulds are used over and over again. Making custom made stamps with a vulcanizing press requiring 'once only' moulds will drive the cost of manufacture up significantly.

Making the mould - before a mould can be made you must have a master plate manufactured from metal or polymer, the master plate has the necessary relief (the artwork is raised) to make an impression in the mould. Having a master plate made each time a mould is required is what drives up the cost of manufacture for vulcanized stamps. Pressing the master plate into a Matrix board creates the mould that will accept the rubber. Heat and pressure is applied to the master plate and matrix board inside a Vulcanizing press. The Matrix follows the shape of the relief provided by the master plate, this then hardens on cooling.

Making Rubber Stamps - Creating stamps is a simple process once the mould is made.  Raw rubber stamp gum is placed on top of the mould and then placed inside the stamp press. Hydraulic pressure is placed upon the rubber and the mould   from within the stamp press causing the rubber to melt into the areas of the mould that contain the images and text, curing and hardening takes about 10 minutes. Once cured the sheet of rubber is pulled away from the mould and cut up into individual stamps to be affixed to mounts.

Cost of a vulcanizing system is approximately $12,000 AUD

Advantages - Low cost of production for mass produced stamps, good ink transfer.

Disadvantages - Cost of producing master plates and moulds for custom made stamps.

Laser Engraved Rubber Stamps

The traditional raw rubber used for vulcanizing stamp dies  is quite unacceptable for the production of laser stamp dies, the laser process  requires a very even thickness and blemish free surface to produce an  acceptable printed image from a stamp die. The rubber must also be subjected to a specific curing process before it can be exposed to the elevated temperature of a laser beam.
The depth of the engraving is determined by the laser speed, its wattage and the density of the rubber. For example, a 50 or 100W engraver will engrave the rubber deeper and faster than a 25W machine, which may require a second pass to achieve a similar result. Usually supplied in an A4 size sheet  form, a good quality laser rubber is required for engraving stamp dies and  must also have suitable compression strength and ink transfer properties.

To assist the engraving process, it is necessary to remove the excess dust which is constantly created by the laser cutting action with an efficient exhaust filtration system. As very few, if any, CO2 laser engraving machines were initially purpose built for engraving and cutting rubber, installing and maintaining an effective dust extraction system pays long term dividends.  Mirrors, lenses and any exposed bearing surfaces should be cleaned thoroughly as part of a regular maintenance program. Any neglect in this area will be detrimental to overall trouble free laser operation, as the build up of dust and residue will affect running efficiency and the quality of the finished stamp die. Lasers are controlled directly from a computer, the software drivers supplied with lasers work with many graphic programs such as CorelDraw.

Approximate cost of a 25 watt Laser suitable for stamp making is $40,000

Advantages - Production is computer controlled, custom made stamps can be made easily

Disadvantages - High capital investment, maintenance costs and running will be much higher than vulcanizing or polymer methods of manufacture.

Liquid Polymer Rubber Stamps

Converting rubber stamp polymer from a liquid into a solid to make stamps is quite fascinating. Polymer stamps are manufactured between two sheets of glass using precision controlled UV light which passes through a negative containing the stamp artwork solidifying the polymer. Negative production has been simplified with the introduction of water based negative technology, photographic chemicals for producing negatives are now a thing of the past.

The first step in making polymer rubber stamps is to print your images, clipart or text onto Vellum, an almost transparent paper like film. To produce quality stamp artwork you must use a laser printer, inks from bubble jet printers are translucent allowing UV light to pass where it should not. Water based negatives are easily washed out after being exposed for a few minutes in a UV exposure stamp machine.

Polymer contained in a sachet is now replacing the older cumbersome method of using foam tape to create a dam and pouring of rubber stamp polymers, the sachets have also addressed the age old problem of removing air bubbles from the poured polymer.

The negative of your artwork and polymer sachet is sandwiched between two sheets of glass spaced 2-3mm apart which is then exposed in the machine for a few minutes. Once you have completed the exposure it is a simple process of cutting open the sachet and washing away the excess unexposed polymer before returning the stamp die back to the machine for a 10 minute curing. Once the stamps are cured they can be cut up individually. Polymer sachets are available in a range of sizes up to A4 size.

Processing time is about 30 minutes for a batch of polymer stamps.

Cost of polymer stamp making machines range from $3,500 AUD for an Australian made unit designed specifically for stamp making up to high end imported units with computer controlled washout for $15,000 AUD.

Advantages - Lower capital investment, polymers make almost clear stamps making them ideal for scrapbooking and card making. Stamp relief can be easily controlled during exposure.

Disadvantages - Early polymers did not accept inks as well as polymers available today, this along with being new technology caused initial resistance to polymer stamps.

Summary

Most large stamp manufacturers have a mix of the above equipment.  The unmounted rubber stamp dies produced with any of these manufacturing methods can be cut up and affixed to simple hand stamps, dater stamps or self inking stamps. Craft stamps are usually affixed to wooden blocks or in the case of polymer stamps affixed to clear acrylic blocks with adhesives or InstaGrip mounting mat. Various manufactures produces stamp mounts. Astron Industries in Australia manufacturer the clear hand stamp 'Vuestamp' and also distribute the Ideal range of self inking mounts. Other brands of self inking mounts are Trodat, Colop and Shiny.

About the Author

To read about cantaloupe facts, calories in cantaloupe and other information, visit the Knowledge Bin site.

self-adhesive film - 1 roll(s) $335.99 Canon - Self-adhesive film - 6 mil - white - Roll (36 in x 66 ft) - 235 g/m2 - 1 roll(s) - for imagePROGRAF iPF700 iPF710 iPF750 iPF755 iPF8000 iPF815 iPF825 iPF9000 W

HP Self Adhesive Gloss Polypropylene Film $64.99 120 g/m² 36" x 75 ft 5.50 mil 95% 97 GE/113 ISO (D65) 97% Designjet 4500 Scanner Printers: Designjet 5500 / 5500ps Designjet 5000 / 5000ps Designjet 4000 / 4000ps Designjet 4500 / 4500ps / 4500mfp Designjet Z6100 / Z6100ps Designjet T1100 / T1100ps / T610 For glossy prints displaying excellent color vibrancy and brilliant, photo-realistic images, you can depend on this self-adhesive polypropylene film. Tear-resistant and easy to handle, its strong adhesive ensures secure, reliable mounting. Glossy HP Hewlett-Packard Inkjet Polypropylene Q8834A Self Adhesive Gloss Polypropylene Film Self-adhesive Film Shelf life: 1 year, unopened in original packaging TAPPI T-425 www.hp.com

Self-adhesive Gloss Polypropylene - self-adhesive glossy polypropylene film - 1 roll(s) $65.99 HP Self-adhesive Gloss Polypropylene - Self-adhesive glossy polypropylene film - 5.5 mil - Roll (36 in x 75 ft) - 120 g/m2 - 1 roll(s) - for DesignJet 4000 4500 4520 5000

HP Self Adhesive Glossy Polypropylene Film, 36"X75Ft Roll. 1 Roll $79.14 Manufacturer: HP. 1 Roll. Self Adhesive Glossy Polypropylene Film Customers also search for: HP Self-Adhesive Gloss, 882780992931

Self Adhesive Address Labels $25.76 These premium bright white shipping labels are great for everyday office use. This labels feature a permanent self adhesive backing. 1,000 labels 100 sheets of 10 per page White adhesive shipping labels size: 4 inches x 2 inches Compatible with all inkjet and laser printersEach sheet size: 8.5 inches x 11 inches Permanent adhesive Compare to Avery 5163

HP Everyday Adhesive Polypropylene Film $76.99 1 Each 101% 20 to 80% Relative Humidity Operating 240 g/m² 32°F (0°C) to 104°F (40°C) Storage 36" x 75 ft 5 to 80% Relative Humidity Storage 59°F (15°C) to 95°F (35°C) Operating 8.90 mil 96% Indoor Outdoor HP Designjet 815 Multi-function Printer Matte polypropylene film delivers quality prints with excellent color vibrancy. Ideal for both indoor and outdoor applications. Use durable film for long-lasting, eye-catching signs and displays. Film is tear-resistant for reliable mounting and easy to print, use, handle and laminate. Adhesive film has a 2" core and 8.9 mil thickness. CG824A Everyday Everyday Adhesive Polypropylene Film HP Hewlett-Packard Inkjet Matte Not Applicable Self-adhesive Film www.hp.com

Canon Canon - Self-adhesive Film - 1 Roll(s). Each $397.07 Manufacturer: Canon. Each. Media Type: Self-adhesive film Media Size: Roll (36 in x 66 ft) Printing Technology: Ink-jet Media Weight: 235 g/m2 Media Thickness: 6 mil Media Color: White Included Qty: 1 roll(s) Designed For: imagePROGRAF iPF500, iPF5000, I

Daf8 - Chartpak Applique Drafting Film - Self-Adhesive - 8.5 inch X 11 inch - 100 / Box - Clear $102.88 this 1.5 Mil, Matte Finish, Polyester Film Helps Save Time When Any Application Needs To Be Drafted Or Drawn Multiple Times. The Matte Surface Gives Top-quality Images Using Copiers, Laser Printers, Computer Printers, Typewriters, Pencil Or Ink. Ideal For Diazo Reproduction And Will Not Yellow With Age. Use With Copiers And Printers. [CHADAF8] UPC: 014173023285 UNSPC: 14121810 2.6 LB

Chartpak Applique Drafting Film $87.99 0% 100 / Box 100 Sheet Drafting film features pressure-sensitive, self-adhesive, transparent Mylar film for use in laser printers. Matte-finish top sheet accepts pencil, pen or typing and runs through printer to add detail from a computer. Pull paper backing off to expose permanent adhesive that adheres to most smooth surfaces. Applique Drafting Film Carbon Paper Chartpak Chartpak, Inc Clear DAFPB8L Letter Letter 8.50" x 11" No Printer Self-adhesive Typewriter www.chartpak.com

Avery Printable Self-Adhesive Tab $7.99 0% 16281 96 96 / Pack Print text directly on durable plastic tab using your PC and inkjet or laser printer or write directly on tabs. Attach tabs to edge of any size page to organize and index bound reports, presentations, reference manuals and catalogs. Special adhesive allows tab to be repositioned when applied but become permanent over time for added security. Each pack includes four sheets of tabs. Avery offers many easy-to-use templates for Microsoft Word and other popular software programs. Avery Avery Dennison Index Tab Multicolor No Plastic 1.25" Width Print-on Printable Self-Adhesive Tab Self-adhesive Removable www.avery.com

Foiled Self-adhesive Wedding Medallions $11.37 Theme: Wedding medallionsColor: GoldMaterials: FoilPackage includes 75 labels: Five (5) sheets with 15 self-adhesive stickers eachEach sticker measures 2-inches in diameter Labels are compatible with laser printersSheet dimensions: 11.75 inches high x 8.25 inches wideImported

Chartpak/Pickett Self Adhesive Drafting Applique Film for Copiers, 8 1/2x11, 100 Matte Sheets/Box. Box of 100 $95.03 Manufacturer: Chartpak/Pickett. Box of 100. Self-Adhesive Drafting Applique Film Enhance creative graphics, save time and quickly reproduce repetitive details. 8-1/2 x 11. 100 sheets per box. For Copiers Film backing sheet. Matte Customers also search for

Con-Tact® Self Adhesive Natural Cork $11.99 Organize and create anywhere! Make any space work for you, no matter the size or shape, with Con-tact® Brand's cut-to-film self-adhesive and removable rolled cork. Features: • Made of natural cork • Self adhesive backing • Naturally resists mold and mildew • Cut to desired shape or size • Finish: CorkSize: 18" wide x 4' long

Avery Self-Adhesive Name Badge Label $3.99 0% 100 / Pack 2 2.34" 2.34" Width x 3.37" Length 3.37" 5144 Blue Border 50 x Sheets Name badges are ideal for conferences, seminars, meetings or special events. Write on or run through a laser or inkjet printer. Self-adhesive badges adhere firmly and remove easily. Badge labels are designed for most fabrics except vinyl, leather, suede, silk, velvet and corduroy. Each 4" x 6" sheet includes two badges with removable adhesive. Each badge has a colored border. 3.6 mil thick. Avery Avery Dennison Inkjet Laser Name Badge Label No Rectangle Removable Self-Adhesive Name Badge Label Self-adhesive www.avery.com

Avery Self-Adhesive Index Tabs With Printable Insert $4.99 0% 25 25 / Pack Precut plastic tabs with inserts can be typed, handwritten or laser printed. Feed 4" x 10" sheets through envelope feeder on printer, then separate individual tabs. Adhesive is permanent. Avery offers many easy-to-use templates for Microsoft Word and other popular software programs. Each index tab offers a 1/3" tab extension. Assorted Avery Avery Dennison Index Tab No Plastic - 2" Print-on S200 Self-Adhesive Index Tabs With Printable Insert Self-adhesive Permanent www.avery.com

HP Self Adhesive Gloss Polypropylene Film 42 x 75 Glossy Selfadhesive Film $110.21 HP Self Adhesive Gloss Polypropylene 42. A quality gloss adhesive polypropylene media for printing glossy images 42 in roll 120g/m2 5.5 mil 75 fit. HP Selfadhesive Gloss Polypropylene produces glossy prints with excellent colour vibrancy for brilliant images. Tearresistant and easy to handle its strong adhesive ensures secure reliable mounting.

HP Self Adhesive Gloss Polypropylene Film 36 x 75 Glossy Selfadhesive Film $93.98 For glossy prints displaying excellent color vibrancy and brilliant photorealistic images you can depend on this selfadhesive polypropylene film. Tearresistant and easy to handle its strong adhesive ensures secure reliable mounting. Compatible with Original HP pigment and dye inks it s an excellent choice for indoor POP displays posters and banners. The film ensures an excellent fade resistance when used with HP pigment inks.

HP Self Adhesive Glossy Polypropylene Film, 42"X75Ft Roll. 1 Roll $100.14 Manufacturer: HP. 1 Roll. Self-adhesive Glossy Polypropylene Film, 42 x75ft Roll Tear-resistant, fade-resistant, durable and easy to handle. An ideal choice for indoor POP displays, posters and banners. Customers also search for: Glossy;HEWLETT PACKARD;In

Roll Form Self-Adhesive Pipe Markers - Oxygen $119.8 Roll form pipe markers are an economical solution for all your pipe marking jobs. Roll Form Pipe Markers have perforated arrows that can be pulled off and used to indicate flow in either direction Clear laminate strengthens self-adhesive plastic film and protects lettering Two sizes available: 9" x 2" with 1-1/4" letters and 3" x 2" arrows 12" x 3" with 1-3/4" letters and 4" x 3" arrows Comes in a roll of 50 markers Marker reads - "Oxygen"

Roll Form Self-Adhesive Pipe Markers - Heating $119.8 Roll form pipe markers are an economical solution for all your pipe marking jobs. Roll Form Pipe Markers have perforated arrows that can be pulled off and used to indicate flow in either direction Clear laminate strengthens self-adhesive plastic film and protects lettering Two sizes available: 9" x 2" with 1-1/4" letters and 3" x 2" arrows 12" x 3" with 1-3/4" letters and 4" x 3" arrows Comes in a roll of 50 markers Marker reads - "Heating"

Roll Form Self-Adhesive Pipe Markers - Oil $119.8 Roll form pipe markers are an economical solution for all your pipe marking jobs. Roll Form Pipe Markers have perforated arrows that can be pulled off and used to indicate flow in either direction Clear laminate strengthens self-adhesive plastic film and protects lettering Two sizes available: 9" x 2" with 1-1/4" letters and 3" x 2" arrows 12" x 3" with 1-3/4" letters and 4" x 3" arrows Comes in a roll of 50 markers Marker reads - "Oil"